6 Messages
•
200 Points
Using my fertility monitor after 2 years packed away
I haven't used my fertility monitor for about 2 years but I would like to start using it again. I only ever got to use it once because I fell pregnant after my first cycle using it. I took the batteries out and packed it away after that. My cycle is totally different now and I'm wondering if there is a way of deleting the data it has stored from this one cycle 2 years ago?? Or do I just start using again as normal ??
karen
465 Messages
•
5.8K Points
10 years ago
Reprogramming your monitor erases all the previous information stored about your cycle. You'll need a test stick to reprogram your monitor, and the test stick can be either previously used or unused. Instructions on how to reprogram your monitor are on page 28 of the instruction booklet. For your convenience, here are the instructions:
1. Make sure that working batteries are in your monitor, then turn your monitor off.
2. Insert a test stick into the test stick slot, checking the position carefully, as there will be no symbol to tell you that the test stick is correctly inserted.
3. Press and hold the 'm' button while you complete steps 4, 5 and 6 below.
4. Press the on/off button to turn your monitor on.
5. A symbol with an exclamation mark, a test stick and an arrow will be displayed. Continue to hold the 'm' button and leave the test stick in position. (If this symbol is not displayed, the test stick is not inserted correctly.)
6. After approximately 15 seconds, all symbols on the display screen will be shown. An exclamation mark, a test stick and an arrow will again be displayed. The 'm' button can now be released and the test stick can be removed.
7. You should see the following symbols on your display screen: '--m.' Your monitor is now reprogrammed and ready for use.
We wish you all the best!
0
0